LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H6DO) >> Drive Cycle >> Procedure >> Preparation For Drive Cycle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Preparation For Drive Cycle

  1. Check battery voltage is more than 12 V and fuel remains half [20 - 40 fl (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. After performing the diagnostics and clearing the memory, check for any remaining unresolved trouble data: < Ref. to , CLEAR MEMORY MODE . >
  3. Separate the test mode connector.
NOTE:
  • Perform the diagnosis after warming up the engine except the engine coolant temperature was specified at engine start.
  • Perform the diagnosis twice if the DTC marked with *. After completing the first diagnosis, stop the engine and perform second diagnosis in same condition.