Front Regulator and Motor Assembly: Removal

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Remove door trim. < Ref. to REMOVAL , Front Door Trim . >
Remove sealing cover. < Ref. to REMOVAL , Front Sealing Cover .>
Remove inner remote. < Ref. to REMOVAL , Front Inner Remote .>
Remove door glass. < Ref. to , REMOVAL , Front Door Glass. >
Disconnect electrical connector of regulator motor.
Loosen four bolts and two nuts to pull out regulator assembly.

Fig 1: Disconnecting Electrical Connector Of Regulator Motor
Courtesy of SUBARU OF AMERICA, INC.
Loosen screws to remove motor assembly.

Fig 2: Removing Motor Assembly
Courtesy of SUBARU OF AMERICA, INC.