Immobilizer Control Unit

Immobilizer Control Unit

REMOVAL

NOTE:
- Prepare the security ID plate.
- Prepare all registered immobilizer keys for the model with immobilizer.
- Make a registration of immobilizer for the model with immobilizer. For detailed operation procedure, refer to "IMMOBILIZER REGISTRATION MANUAL".
- If replacing the immobilizer control unit, check the current setting and note it.

1. Disconnect the ground cable from battery.
2. Remove the instrument panel lower cover.
3. Disconnect the connector from immobilizer control unit.




4. Remove the immobilizer control unit.

INSTALLATION
Install in the reverse order of removal.

NOTE: Make sure it conforms to the current setting condition after installation.