LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Outback XT, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Combination Base Switch Assembly >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Combination Base Switch Assembly: Removal

  1. Remove the driver's airbag module. < Ref. to REMOVAL , Driver's Airbag Module. >
  2. Remove the steering wheel. < Ref. to REMOVAL , Steering Wheel. >
  3. Remove the screws and remove the steering column lower cover.
    Fig 1: Removing Screws And Steering Column Lower Cover
    G03833534Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the combination switch. < Ref. to , REMOVAL , Combination Switch (Light).> < Ref. to REMOVAL , Combination Switch (Wiper). >
  5. Remove the four screws and remove the roll connector.
  6. Remove the three screws.
    Fig 2: Removing Three Screws
    G03833535Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector and remove the combination base switch assembly.
scientia non olet · About LEMON Manuals