LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Baja Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC)) >> VDC Sequence Control >> Specification >> Conditions For Completion Of VDC Sequence Control
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Conditions For Completion Of VDC Sequence Control

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

When the following conditions develop, the VDC sequence control stops and VDC operation is returned to the normal control mode.

  1. When the speed of at least one wheel reaches 10 km/h (6 MPH).
  2. When the brake pedal is pressed during sequence control and the stop light switch is set to ON.
  3. After completion of VDC sequence control.
  4. When a malfunction is detected.
scientia non olet · About LEMON Manuals