Rear Oxygen Sensor: Installation

Before installing rear oxygen sensor, apply anti-seize compound only to the threaded portion of rear oxygen sensor to make the next removal easier.
CAUTION: Never apply anti-seize compound to protector of rear oxygen sensor.

Anti-seize compound:

NEVER-SEEZ NS-165 or equivalent
Install the rear oxygen sensor.
Tightening torque:

21 N.m (2.1 kgf-m, 15.2 ft-lb)

Fig 1: Locating Rear Oxygen Sensor
Connect the connector to the rear oxygen sensor.

Fig 2: Locating Connector For Rear Oxygen Sensor
Connect the clip to the crossmember.

Fig 3: Locating Clips
Lower the vehicle.
Connect the battery ground cable to battery.