LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Impreza WRX STi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (STI) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (Normal Mode)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

SUBARU Select Monitor (Normal Mode)

  1. On the «Main Menu» display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type is displayed.
  4. On the «Engine Diagnosis» display screen, select the {Clear Memory} and press the [YES] key.
  5. When the 'Done' and 'Turn Ignition Switch OFF' are shown on the display screen, turn the ignition switch to OFF, and then turn the Subaru Select Monitor to OFF.
    NOTE: For detailed operation procedure, refer to the Subaru Select Monitor Operation Manual.
scientia non olet · About LEMON Manuals