Stop and Brake Switch: Inspection
WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
Measure the brake switch (A) and stop light switch (B) resistance.
BRAKE AND STOP LIGHT SWITCH RESISTANCE SPECIFICATION
| Switch | Pedal | Terminal No. | Standard |
|---|---|---|---|
| Brake | Released | 1 and 4 | Less than 1 Ω |
| Depressed | 1 and 4 | More than 1 MΩ | |
| Stop light | Released | 2 and 3 | More than 1 MΩ |
| Depressed | 2 and 3 | Less than 1 Ω |
If NG, replace stop and brake switch.