Clutch Fluid: Replacement
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Use new FMVSS No. 116, DOT3 or 4 brake fluid.
- Cover the bleeder with cloth to prevent brake fluid from being splashed on surrounding parts when loosening the bleeder.
- Avoid mixing different brands of brake fluid to prevent the quality of fluid from degrading.
- Be careful not to allow dirt or dust to enter the reservoir tank.
NOTE:
- During bleeding operation, keep the clutch reservoir tank filled with brake fluid to prevent entry of air.
- Clutch pedal must be operated very slowly.
- For convenience and safety, it is advisable to have two people working.
- The amount of brake fluid required is approximately 70 m l (2.4 US fl. oz., 2.5 Imp fl. oz.) for total clutch system.
- Remove the air intake chamber. < Ref. to REMOVAL , Air Intake Chamber. >
- Drain the brake fluid from the reservoir tank.
- Refill the reservoir tank with recommended brake fluid.
Recommended brake fluid:
FMVSS No. 116, fresh DOT3 or 4 brake fluid
- Drain all contaminated fluid using the same method as for air bleeding.NOTE: Refill the brake fluid before the reservoir tank becomes empty.