AT Shift Lock Solenoid and "P" Range Switch: Removal

Remove the console box. < Ref. to REMOVAL , Console Box. >
Disconnect the connector.
Remove the indicator bulb.

Fig 1: Identifying Indicator Bulb
Remove the grip.
Remove the indicator cover.

Fig 2: Locating Indicator Cover
Disconnect the connector from the guide plate upper.

Fig 3: Disconnecting Connector From Guide Plate Upper
Shift the select lever to the N range, and then remove the detent spring.

Fig 4: Identifying Detent Spring
Remove the switch assembly and shift lock solenoid assembly.

Fig 5: Identifying Switch Assembly And Shift Lock Solenoid Assembly
Remove the bolt to remove the guide plate upper (A).

Fig 6: Identifying Guide Plate Upper
Raise the claw of the connector.

Fig 7: Identifying Claw Of Connector
Disconnect the terminal of the "P" range switch from connector, using a flat-tip screwdriver with a thin tip.

Fig 8: Identifying Range Switch