LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback XT, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Glass/Window/Mirrors) >> Front Regulator and Motor Assembly >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Regulator and Motor Assembly: Removal

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove door trim. < Ref. to REMOVAL , FRONT DOOR TRIM. >
  2. Remove sealing cover. < Ref. to REMOVAL , FRONT SEALING COVER. >
  3. Remove inner remote. < Ref. to REMOVAL , FRONT INNER REMOTE. >
  4. Remove door glass. < Ref. to REMOVAL , FRONT DOOR GLASS. >
  5. Disconnect electrical connector of regulator motor.
  6. Loosen four bolts and two nuts to pull out regulator assembly.
    Fig 1: Disconnecting Electrical Connector Of Regulator Motor
    G04991507Courtesy of SUBARU OF AMERICA, INC.
  7. Loosen screws to remove motor assembly.
    Fig 2: Locating Motor Assembly
    G04991508Courtesy of SUBARU OF AMERICA, INC.