LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Diagnostics) 4AT >> Subaru Select Monitor >> Operation >> Clear Memory Mode
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Clear Memory Mode

  1. On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Transmission} and press the [YES] key.
  3. Press the [YES] key after the information of transmission type is displayed.
  4. On the «Transmission Diagnosis» display screen, select the {Clear Memory} and press the [YES] key.
NOTE: If {Clear Memory 2} is selected and performed, DTC and learned control memory are cleared. If Clear Memory 2 is performed, execute the advance operation of learning control. < Ref. to FACILITATION OF LEARNING CONTROL , OPERATION, Subaru Select Monitor. >
scientia non olet · About LEMON Manuals