LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 4AT >> Reduction Drive Gear >> Assembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Reduction Drive Gear: Assembly

  1. Press-fit the reduction drive gear to shaft.
  2. Press-fit the new ball bearing into reduction drive gear.
  3. Apply Vaseline onto the seal ring outer surface and shaft grooves.
  4. Apply ATF to new seal rings and install them.
    Fig 1: Identifying Seal Rings
    G05021923Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals