Immobilizer Control Module
Immobilizer Control ModuleREMOVAL
NOTE:
- Prepare the security ID plate.
- Prepare all registered immobilizer keys for the model with immobilizer.
- When replacing the immobilizer control module,register the immobilizer. At that time, a new immobilizer key is required. Refer to the REGISTRATION MANUAL FOR IMMOBILIZER.
- If not replacing the immobilizer control module,re-registration of a key used before is not required.
- If not replacing the immobilizer control module, a maximum of four keys, including the added key,can be registered.
1. Disconnect the ground cable from the battery.
2. Remove the instrument panel lower cover.
3. Disconnect the connector from immobilizer control module.
4. Remove the immobilizer control module.
INSTALLATION
Install in the reverse order of removal.