- Disconnect the ground cable from the battery.
- Remove the air cleaner case to make it easier to remove the ABSCM&H/U. <Ref. to
REMOVAL
, Air Cleaner Case. >
- Use an air gun to blow off any water around the ABSCM&H/U.
NOTE:
A contact fault may occur if the terminal is wet.
- Lift the lock lever and disconnect the ABSCM&H/U connector.
CAUTION:
Do not pull on the harness when disconnecting the connector.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the harness clip.
- Disconnect the brake pipes from the ABSCM&H/U.
- Wrap the brake pipe with a vinyl bag so as not to spill the brake fluid on the vehicle body.
CAUTION:
If brake fluid is spilled on the vehicle body, wash it off immediately with water and wipe clean.
- Remove the nuts and remove the ABSCM&H/U.
CAUTION:
- Do not drop or bump the ABSCM&H/U.
- Do not turn the ABSCM&H/U upside down or place it sideways for storage.
- Be careful not to let foreign matter enter into ABSCM&H/U.
- Be careful that no water enters the connectors.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the ABSCM&H/U bracket.