RH Side

Install in the reverse order of removal.

Fig 1: Identifying Fuel Injector And Insulator

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 

19 N.m (1.9 kgf-m, 14.0 ft-lb) 

Fig 2: Locating Bolt Holding Fuel Injector Pipe Onto Intake Manifold (RH)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 

19 N.m (1.9 kgf-m, 14.0 ft-lb) 

Fig 3: Locating Bolt Holding Fuel Injector Pipe Onto Intake Manifold (RH)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 

19 N.m (1.9 kgf-m, 14.0 ft-lb) 

• Except for STI model
  Fig 4: Locating Fuel Pipe Protector With Bolts (RH)

  Courtesy of SUBARU OF AMERICA, INC.
• STI model
Fig 5: Locating Fuel Pipe Protector With Bolts (RH) For STI Model
Courtesy of SUBARU OF AMERICA, INC.