LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> Impreza WRX STi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (STI) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (Normal Mode)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SUBARU Select Monitor (Normal Mode)

  1. On the «Main Menu» display screen, select {Each System Check}.
  2. On the «System Selection Menu» display screen, select {Engine Control System}.
  3. Select the [OK] after the information of engine type has been displayed.
  4. On the «Engine Diagnosis" display screen, select {Clear Memory}.
  5. When the «Done» is shown on the display screen, turn the ignition switch to OFF, and then Subaru Select Monitor to OFF.
NOTE: For detailed operation procedure, refer to the " SUBARU SELECT MONITOR OPERATION MANUAL ".
scientia non olet · About LEMON Manuals