Cruise Control Command Switch: Inspection

Measure the cruise control command switch resistance.

Fig 1: Identifying Cruise Control Command Switch Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.

CONNECTOR TERMINAL RESISTANCE SPECIFICATION

Switch	Position	Terminal No.	Standard
CANCEL	ON	1 (+) and 2 (-)	Less than 1 Ω
CANCEL	ON	1 (+) and 3 (-)	Less than 1 Ω
SET/COAST	OFF	1 and 2	1 MΩ or more
SET/COAST	ON	1 and 2	Less than 1 Ω
RESUME/ACCEL	OFF	1 and 3	1 MΩ or more
RESUME/ACCEL	ON	1 and 3	Less than 1 Ω
MAIN SWITCH	OFF	5 and 4	1 MΩ or more
MAIN SWITCH	ON	5 and 4	Less than 1 Ω

If NG, replace the cruise control command switch.