Cruise Control Command Switch: Inspection
WARNING: This page is about a different car, the 2006 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
Measure the cruise control command switch resistance.
SWITCH POSITION
| Switch | Position | Terminal No. | Standard value |
|---|---|---|---|
| CANCEL | ON | 1 (+) and 2 (-) | Less than 1 Ω |
| ON | 1 (+) and 3 (-) | Less than 1 Ω | |
| SET/COAST | OFF | 1 and 2 | More than 1 MΩ |
| ON | 1 and 2 | Less than 1 Ω | |
| RESUME/ACCEL | OFF | 1 and 3 | More than 1 MΩ |
| ON | 1 and 3 | Less than 1 Ω | |
| MAIN SWITCH | OFF | 5 and 4 | More than 1 MΩ |
| ON | 5 and 4 | Less than 1 MΩ |
If NG, replace the cruise control command switch.