LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> Legacy GT spec.B >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Keyless Entry Control Module >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Keyless Entry Control Module: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the glove box. < Ref. to REMOVAL , Glove Box. >
  3. Remove the screw, disconnect the connector and remove the keyless entry control module.
    Fig 1: Locating Keyless Entry Control Module Screws
    G05022830Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals