Injector Control (Injection Stop Mode)
CAUTION:
After performing the Operation Check Mode, perform the Clear Memory Mode <Ref. to
OPERATION , Clear Memory Mode.> and the Inspection Mode <Ref. to
PROCEDURE , Inspection Mode.>.
- On the «System Operation Check Mode» display screen, select {Injector Control}.
- On the «Injector Control» display screen, select {Injection Stop Mode}.
- Start the engine on the desired injector number in the «Injection Stop Mode» screen, and select the [OK].
- On the «Start the Engine» display screen, start the engine and select the [OK].
- Select the [NO] to end the injection stop mode. The screen will return to the «Injector Control» screen.