Power Window Switch: Service and Repair

POWER WINDOW CONTROL SWITCH

REMOVAL

1. MAIN SWITCH
1. Disconnect the ground cable from the battery.
2. Remove the screw cover and loosen the inner screws by using a flat tip screwdriver or similar tools.






3. Detach the hook of the switch panel, and remove the power window main switch assembly.






4. Disconnect the connector.
5. Detach the screw on the backside of the switch panel, and remove the power window switch.

2. SUB-SWITCH
1. Disconnect the ground cable from the battery.
2. Remove the screw securing the switch panel.






3. Remove the switch panel.






4. Disconnect the connector.
5. Detach the screw on the backside of the switch panel, and remove the power window switch.

INSTALLATION

Install in the reverse order of removal.