Initialization Is Impossible

DIAGNOSTIC PROCEDURE CHART

Step	Check	Yes	No
1 CHECK OPERATION. Check the rotation of each motor when performing all the power seat switch operation.	Does each motor rotate for one second or more when operating each switch?	Go to step 2.	Encoder defection. Replace the appropriate motor.
2 CHECK SWITCH. Disconnect the harness connector of power seat switch assembly. Measure the resistance between all the connector terminals of power seat switch assembly. <Ref. to CHECK POWER SEAT SWITCH , INSPECTION, Power Seat System.>	Is the inspection result correct?	Replace the memory module.	Replace the power seat switch assembly.