Service Data
SERVICE DATA SPECIFICATION
| Drive pinion bearing preload (For new bearing) | Measure with spring measurement. (Measured from the companion flange bolt) N (kgf, lbf) | T-type (Except for GT spec. B 6MT model) | 17.7 - 38.8 (1.8 - 4.0,4.0 - 8.7) |
| T-type (GT spec. B 6MT model) | 24.1-38.6 (2.5 - 3.9,5.4 - 8.7) | ||
| VA-type | 12.7 - 32.2 (1.3 - 3.3,2.9 - 7.2) | ||
| Measure with torque wrench N.m (kgf-m, ft-lb) | T-type (Except for GT spec. B 6MT model) | 0.67-1.47 (0.07 - 0.15,0.49-1.08) | |
| T-type(GT spec. B 6MT model) | 0.91 - 1.46 (0.09 - 0.15,0.67-1.08) | ||
| VA-type | 0.48-1.22 (0.05 - 0.12,0.35 - 0.90) | ||
| Side gear backlash | mm (in) | T-type | 0.10 - 0.20 (0.004 - 0.008) |
| VA1-type only | 0.05 - 0.15 (0.002 - 0.006) | ||
| Side bearing standard width | mm (in) | 20.00 (0.7874) | |
| Hypoid driven gear to drive pinion backlash | mm (in) | T-type | 0.10 - 0.20 (0.004 - 0.008) |
| VA-type | 0.10 - 0.15 (0.004 - 0.006) | ||
| Hypoid driven gear runout on its back surface | mm (in) | 0.05 (0.002) | |