Starting System & Charging System (H4SO): Generator: Removal

Disconnect the ground cable from the battery.

Fig 1: Disconnecting Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector and terminal from generator.
- 2.5 L Non-turbo model
  
  Fig 2: Identifying Generator Connector - Non-Turbo Model
  Courtesy of SUBARU OF AMERICA, INC.
- 3.0 L Non-turbo model
  
  Fig 3: Identifying Generator Connector - 3.0 L Non-Turbo Model
  Courtesy of SUBARU OF AMERICA, INC.
- Turbo model
  
  Fig 4: Identifying Generator Connector - Turbo Model
  Courtesy of SUBARU OF AMERICA, INC.
Remove the V-belt covers.
Remove the V-belts.
<Ref. to FRONT SIDE BELT , REMOVAL, V-belt for H4SO.> or <Ref. to FRONT SIDE BELT , REMOVAL, V-belt for H4DOTC.> <Ref. to REMOVAL , V-belt for H6DO.>
Remove the bolts which install the generator onto bracket.

Fig 5: Locating Generator Bolts
Courtesy of SUBARU OF AMERICA, INC.