Fuel Delivery and Evaporation Lines: Installation

Connect the quick connector on fuel line.
CAUTION: Make sure there is no damage or dust on the connections. If necessary, clean seal surface of pipe.

NOTE: Use a new retainer.

Fig 1: Identifying Seal Surface And Pipe
Courtesy of SUBARU OF AMERICA, INC.
1. Set the new retainer (B) to connector (A).
2. Push the pipe into the connector completely.
  
  Fig 2: Pushing Pipe Into Connector
  Courtesy of SUBARU OF AMERICA, INC.
  CAUTION:
  - Pull the connector to ensure it is connected securely.
  - Make sure the two retainer claws are engaged in their mating positions in the connector.
  - Be sure to inspect the hoses and their connections for fuel leakage.
    
    Fig 3: Identifying Connector, Retainer And Pipe
    Courtesy of SUBARU OF AMERICA, INC.
Connect the fuel delivery hose to the pipe with an overlap of 20 to 25 mm (0.79 to 0.98 in).
Type A: When the amount to be inserted is specified.

Type B: When the amount to be inserted is not specified.

l : 2.5±1.5 mm (0.098±0.059 in)

L: 22.5±2.5 mm (0.886±0.098 in)

CAUTION: Be sure to inspect the hoses and their connections for fuel leakage.

Fig 4: Fuel Delivery Hose Connections
Courtesy of SUBARU OF AMERICA, INC.
Connect the evaporation hose to the pipe with an overlap of approx. 15 to 20 mm (0.59 to 0.79 in).
Fuel evaporation hose:

L = 17.5±2.5 mm (0.689±0.098 in)

CAUTION: Be sure to inspect the hoses and their connections for fuel leakage.

Fig 5: Identifying Evaporation Hose Length
Courtesy of SUBARU OF AMERICA, INC.