Universal Joint: Installation
WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Align the cutout portion at serrated section of the column shaft and yoke, then install the universal joint into column shaft.
- Install the universal joint to the serrations of gearbox assembly by matching alignment marks.
- Tighten the bolt.
Tightening torque: 24 N.m (2.4 kgf-m, 17.4 ft-lb)
CAUTION: Excessively large tightening torque of universal joint bolts may lead to heavy steering wheel operation. - Align the center position of the roll connector. <Ref. to ADJUSTMENT , Roll Connector .>
- Install the steering wheel. <Ref. to INSTALLATION , Steering Wheel .>