LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Airbag System) >> Front Sub Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Sub Sensor: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
  3. Remove the front bumper face. <Ref. to FRONT BUMPER FACE , REMOVAL, Front Bumper .>
  4. Remove the bolt, and then detach the front sub sensor.
    5. Fig 1: Identifying Front Sub Sensor With Bolt
    G05020510Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from front sub sensor.
scientia non olet · About LEMON Manuals