Section 12 (Starting/Charging Systems (H4SO)): General Description: Specification

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

GENERAL SPECIFICATION

Item			Specification
Vehicle model			MT	AT
Starter	Type		Reduction type
	Model		428000-2300	428000-2290
	Manufacturer		DENSO
	Voltage and output		12 V - 1.0 kW	12 V - 1.4 kW
	Direction of rotation		Counterclockwise (when observed from pinion)
	Number of pinion teeth		9	9
	No-load characteristics	Voltage	11 V	11 V
		Current	90 A or less	90 A or less
		Rotating speed	1,820 RPM or more	1,720 RPM or more
	Load characteristics	Voltage	8 V	8 V
		Current	280 A	370 A
		Torque	7.76 N.m (0.79 kgf-m, 5.7 ft-lb) or more	12.78 N.m (1.30 kgf-m, 9.4 ft-lb) or more
		Rotating speed	900 RPM or more	850 RPM or more
	Lock characteristics	Voltage	3 V	3 V
		Current	900 A or less	900 A or less
		Torque	13.62 N.m (1.39 kgf-m, 10.0 ft-lb) or more	15.42 N.m (1.57 kgf-m, 11.3 ft-lb) or more
Generator	Type		Rotating-field three-phase type, voltage regulator built-in type, with load response control system
	Model	2.5 L Non-turbo	A003TG2391ZC
		3.0 L Non-turbo	A003TB1891
		2.5 L Turbo	A003TG0491
	Manufacturer		Mitsubishi Electric
	Voltage and output	2.5 L Non-turbo and 2.5 L turbo	12 V - 110 A
	Voltage and output	3.0 L Non-turbo	12 V - 100 A
	Polarity on ground side		Negative
	Direction of rotation		Clockwise (When observed from pulley side)
	Armature connection		3-phase Y-type
	Output current	2.5 L Non-turbo and 2.5 L turbo	1,500 RPM - 50 A or more 2,500 RPM - 91 A or more 5,000 RPM - 105 A or more
	Output current	3.0 L Non-turbo	1,500 RPM - 43 A or more 2,500 RPM - 76 A or more 5,000 RPM - 100 A or more
	Regulated voltage		14.1 - 14.8 V [20 °C (68 °F)]
Battery	Type and capacity		12 V - 48 AH (55D23L)	12 V - 52 AH (75D23L)