Section 12 (Starting/Charging Systems (H4SO)): Generator: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Disconnect the connector and terminal from generator.
- 2.5 L Non-turbo model
  
  Fig 2: Identifying Generator Connector - 2.5 L Non-Turbo Model
- 3.0 L Non-turbo model
  
  Fig 3: Identifying Generator Connector - 3.0 L Non-Turbo Model
- Turbo model
  
  Fig 4: Identifying Generator Connector - Turbo Model
Remove the V-belt covers.
Remove the V-belts.
< Ref. to FRONT SIDE BELT (H4SO) , REMOVAL, V-belt. > or < Ref. to FRONT SIDE BELT (H4DOTC) , REMOVAL, V-belt. > < Ref. to REMOVAL , V-belt. >
Remove the bolts which install the generator onto bracket.

Fig 5: Locating Generator Bolts