Check The Illumination

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Turn the lighting switch to level 1.
NOTE: Make sure that the bright switch is not turned ON at this time.
Make sure that "On" lights in the illumination item, then the screen fades out.

Standard Value: "On" should be lit.

OK: Normal

NG: If "On" does not light, check the signal line connection. If there are no problems, the unit could be faulty.