Outer Mirror Assembly: Inspection

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Check that the rearview mirror moves properly when the battery voltage is applied to terminals.

Model with side turn signal light

Fig 1: [Identifying Rear View Mirror Connector Terminal - Model With Side Turn Signal Light]

Courtesy of SUBARU OF AMERICA, INC.

TERMINAL REFERENCE CHART

Switch position	Terminal No.
OFF	-
UP	6 (+) and 3 (-) or 8 (-)
DOWN	3 (+) or 8 (+) and 6 (-)
LEFT	7 (+) and 3 (-) or 8 (-)
RIGHT	3 (+) or 8 (+) and 7 (-)

Model without side turn signal light

Fig 2: [Identifying Rear View Mirror Connector Terminal - Model Without Side Turn Signal Light]

Courtesy of SUBARU OF AMERICA, INC.

RESISTANCE SPECIFICATION CHART

Switch position	Terminal No.
OFF	-
UP	4 (+) and 2 (-) or 6 (-)
DOWN	2 (+) or 6 (+) and 4 (-)
LEFT	5 (+) and 6 (-) or 2 (-)
RIGHT	6 (+) or 2 (+) and 5 (-)

Replace the outer mirror assembly if defective.