Check With SUBARU Select Monitor

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Check that the rear window defogger timer is in initial setting or customize setting before performing inspection.

DIAGNOSTIC PROCEDURE CHART

Step	Check	Yes	No
1 CHECK INPUT SIGNAL TO BODY INTEGRATED UNIT. Check the input signal when the rear window defogger switch is operated using Subaru Select Monitor. Connect the Subaru Select Monitor to the data link connector. Turn the ignition switch to ON. Select {Integ. unit} from the «main menu». Select the {Current Data Display & Save}. Check the input signal when the rear window defogger switch is set to ON.	After rear defogger switch is set to ON, does it turn to OFF in 15 minutes? Or does it repeat 15 minutes operation and 2 minutes stop?	END.	Replace the body integrated unit. < Ref. to REMOVAL , Body Integrated Unit. >