LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Fuel Injection System (H4SO)) >> Intake Manifold >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Manifold: Disassembly

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the engine ground terminal from intake manifold.
    Fig 1: Locating Engine Ground Terminal Bolts
    G04997358Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ignition coil and ignitor assembly. <Ref. to REMOVAL , Ignition Coil and Ignitor Assembly.>
  3. Remove the throttle body. <Ref. to REMOVAL , Throttle Body. >
  4. Remove the EGR valve. <Ref. to REMOVAL , EGR Valve. >
  5. Remove the plug cord stay.
    Fig 2: Locating Plug Cord Stay
    G05659407Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the fuel pipe protector LH.
    Fig 3: Locating Fuel Pipe Protector Bolts LH
    G04997360Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the fuel pipe protector RH.
    Fig 4: Locating Fuel Pipe Protector Bolts RH
    G04997361Courtesy of SUBARU OF AMERICA, INC.
  8. Disconnect the connectors (A) from fuel injector.
  9. Remove the harness band (B) which holds the engine harness to injector pipe.
    Fig 5: Identifying Harness Band
    G04997362Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the purge control solenoid valve. <Ref. to REMOVAL , Purge Control Solenoid Valve.>
  11. Remove the harness band clips which install the engine harness.
    Fig 6: Locating Engine Harness Clips
    G04997363Courtesy of SUBARU OF AMERICA, INC.
  12. Remove the bolts which hold engine harness to intake manifold.
    Fig 7: Locating Intake Manifold Bolts
    G05659412Courtesy of SUBARU OF AMERICA, INC.
  13. Remove the engine harness from intake manifold.
  14. Remove the bolts which install fuel injector pipe on the intake manifold as shown in the figure
    • RH side
      Fig 8: Locating Fuel Injector Pipe Bolts (RH Side)
      G04997365Courtesy of SUBARU OF AMERICA, INC.
    • LH side
    Fig 9: Locating Fuel Injector Pipe Bolts (LH Side)
    G04997366Courtesy of SUBARU OF AMERICA, INC.
    Fig 10: Locating Fuel Injector Pipe Bolt
    G04997367Courtesy of SUBARU OF AMERICA, INC.
  15. Remove the fuel injectors from the fuel injector pipe.
  16. Disconnect the quick connector that fastens the fuel injector pipe RH to the fuel pipe.
    Fig 11: Identifying Fuel Injector Pipe RH To Fuel Pipe
    G04997368Courtesy of SUBARU OF AMERICA, INC.
  17. Disconnect the quick connector that fastens the fuel injector pipe LH to the fuel pipe.
    Fig 12: Identifying Fuel Injector Pipe LH To Fuel Pipe
    G04997369Courtesy of SUBARU OF AMERICA, INC.
  18. Remove the fuel injector pipe RH and LH.
  19. Remove the bolts which install fuel pipes on intake manifold.
    Fig 13: Locating Fuel Pipes Bolt
    G04997370Courtesy of SUBARU OF AMERICA, INC.
  20. Remove the fuel pipe from intake manifold.
scientia non olet · About LEMON Manuals