Operating Cylinder: Assembly

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

During assembly, apply hydraulic oil to all parts.
The illustration below is suitable for every model. Perform the same procedures for the other models.

Recommended clutch fluid:

New FMVSS No. 116 DOT3 or DOT4 brake fluid

Install the piston spring to the piston.

Fig 1: Identifying Piston And Piston Spring
Courtesy of SUBARU OF AMERICA, INC.
Insert piston to the operating cylinder.
Install push rod to the boot.
Install boot and push rod to the operating cylinder.

Fig 2: Identifying Boots And Push Rod Assembly

Courtesy of SUBARU OF AMERICA, INC.