Operating Cylinder: Disassembly

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The illustration below is suitable for every model. Perform the same procedures for the other models.

Remove the boots and push rod assembly.

Fig 1: Identifying Boots And Push Rod Assembly
Courtesy of SUBARU OF AMERICA, INC.
Apply compressed air through clutch hose attaching port.
NOTE: Face the piston port down and place a piece of wood underneath to prevent the piston from popping out.

Fig 2: Identifying Clutch Hose
Courtesy of SUBARU OF AMERICA, INC.
Separate the piston and piston spring.

Fig 3: Identifying Piston And Piston Spring

Courtesy of SUBARU OF AMERICA, INC.