Wheel Alignment: Inspection: Caster
WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Inspection
- Place the front wheel on the turning radius gauge. Make sure the ground contact surfaces of the front and rear wheels are at the same height.
- Set the adapter into the center of wheel, and then set the wheel alignment gauge.
- Measure the caster angle in accordance with the operation manual for wheel alignment gauge.
CASTER ANGLE SPECIFICATION
| Model | Caster |
|---|---|
| Except for OUTBACK | 5°55' |
| OUTBACK | 5°50' |