Satellite Safing Sensor: Installation

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not reuse the bolt and nut.
Always use new bolts and nuts for them.
When installing the satellite safing sensor cover, push the cover securely until it contacts the floor panel.
When the installation of the satellite safing sensor cover becomes loose and it can be removed easily, replace the cover with a new part.
After installing the satellite safing sensor cover, check that the sensor harness is not pinched.

Install in the reverse order of removal.

Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)