Outer Mirror Assembly: Inspection

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Check to ensure that the outer mirror moves properly when the battery voltage is applied to terminals.

Model without mirror heater

Fig 1: Identifying Outer Mirror Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.

CONNECTOR TERMINALS SPECIFICATIONS

Switch position	Terminal No.
OFF	-
UP	6 (+) and 3 (-)
DOWN	3 (+) and 6 (-)
LEFT	7 (+) and 3 (-)
RIGHT	3 (+) and 7 (-)

Replace the outer mirror if defective.

Model with mirror heater

Fig 2: Identifying Outer Mirror Connector Terminals (Mirror Heater)

Courtesy of SUBARU OF AMERICA, INC.

CONNECTOR TERMINALS SPECIFICATIONS

Switch position	Terminal No.
OFF	-
UP	7 (+) and 3 (-)
DOWN	3 (+) and 7 (-)
LEFT	8 (+) and 3 (-)
RIGHT	3 (+) and 8 (-)

Replace the outer mirror if defective.