Scalp Cap: Replacement

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Remove the mirror. <Ref. to REPLACEMENT , Outer Mirror. >
Press-in the clips (A) from inside of outer mirror.

Fig 1: Pressing Clips From Inside Of Outer Mirror
Courtesy of SUBARU OF AMERICA, INC.
Pull the scalp cap towards the front of the outer mirror, then remove the scalp cap.
Align clip (A) on the reverse side of the scalp cap and the clip attachment hole of the outer mirror, and push the scalp cap in.

Fig 2: Aligning Clip On Reverse Side Of Scalp Cap And Clip Attachment Hole Of Outer Mirror
Courtesy of SUBARU OF AMERICA, INC.
Install the scalp cap securely.