LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Automatic Transmission 5AT) >> Front Differential Assembly >> Disassembly >> Differential Case Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Differential Case Assembly

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the taper roller bearing using the ST and a press.

    ST 498077000 REMOVER

    Fig 1: Identifying Taper Roller Bearing
    G05002714
  2. Secure the case in a vise, remove the hypoid driven gear tightening bolts, and then separate the hypoid driven gear into case (RH) and case (LH).
    Fig 2: Identifying Hypoid Driven Gear And Differential Case
    G05022375
  3. Pull out the straight pin and shaft, and then remove the differential bevel gear, washer and differential bevel pinion.
    Fig 3: Identifying Differential Case
    G05022376
scientia non olet · About LEMON Manuals