LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Security And Locks) >> Impact Sensor >> Adjustment >> Check Impact Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Impact Sensor

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the key from ignition switch.
  2. Close all the windows.
  3. Close all the doors, trunk lid and rear gate. Leave open the front hood.
  4. Press the LOCK button of the keyless transmitter from outside of vehicle.
  5. Check that the security indicator light blinks twice within 0.5 seconds in 2 second cycles after 30 seconds.
  6. Hit the windshield with your palm continuously and check the security alarm operates. Lift up the front hood approx. 12 cm (4.7 in) or more, and then drop it off to check the operation of security alarm.
  7. If NG, adjust the impact sensitivity.
scientia non olet · About LEMON Manuals