LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Security And Locks) >> Keyless Entry System >> Inspection >> Check Room Light Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Room Light Operation

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
ROOM LIGHT OPERATION CHECKING PROCEDURE CHART

Step Check Yes No
1 CHECK ROOM LIGHT OPERATION. 
Make sure the room light illuminates when the room light switch is turned to ON.		 Does the room light illuminate? Go to step 2.  Check the room light circuit.
2 CHECK HARNESS BETWEEN ROOM LIGHT AND BODY INTEGRATED UNIT. 
  1. Disconnect the body integrated unit harness connector and room light harness connector.
  2. Measure the resistance between the body integrated unit harness connector terminal and room light harness connector terminal.

    Connector & terminal 

    (B280) No. 3 - (R52) No. 2: 

 Is the resistance less than 10 Ω? The room light operation circuit is OK. Check the harness for open or short between body integrated unit and room light.
scientia non olet · About LEMON Manuals