Transmitter Battery
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Measure the voltage between the keyless transmitter battery (+) terminal and (-) terminal.
NOTE:
Battery discharge occurs during the measurement. Complete the measurement within 5 seconds.
VOLTAGE SPECIFICATION
| Tester connection | Standard | |
|---|---|---|
| (+) | (-) | |
| Battery Positive terminal | Battery Ground terminal | 2.5 - 3.0 V |
If NG, replace the battery. (Use CR2025 or equivalent.)