LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Security And Locks) >> Trunk Lid Lock Assembly >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Trunk Lid Lock Assembly: Inspection

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the trunk lid actuator harness connector.
  2. Connect the battery to the trunk lid actuator terminals.
    Fig 1: Identifying Trunk Lid Actuator Harness Connector
    G05022816
    TERMINALS AND ACTUATOR OPERATION REFERENCE

    Terminal No. Actuator operation
    No. 2 (+) and No. 1 (-) Lock → Unlock

    If defective, replace the trunk lid actuator.

  3. Check the striker for deformation or abnormal wear.
  4. Check the safety lever for improper movement.
  5. Check other levers and springs for rust formation or unsmooth movement.
  6. Check the cable of the trunk opener for smooth operation.
scientia non olet · About LEMON Manuals