Curtain Airbag Module: Inspection
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Refer to "CAUTION" of "General Description" before handling the airbag module. < Ref. to
CAUTION , General Description. >
Check for the following, and replace the damaged parts with new parts. < Ref. to CURTAIN AIRBAG MODULE , INSPECTION, Inspection Locations After a Collision. >
- With side collision (when curtain airbag is deployed)
- Curtain airbag module assembly
- Roof trim
- Front pillar upper trim
- Center pillar upper trim
- Rear quarter pillar trim
- Airbag guide A, B, C
- When damage is found by visual check
- Assist grip
- Assist grip bracket
- Curtain airbag harness and connector on body side.
- With side collision (when curtain airbag is not deployed)
Check the roof trim, pillar trim and airbag module visually, and then replace them with new parts if damaged or cracked.
Specially inspect the damage of airbag module body, mounting bracket and harness connector.
- Without side collision (dirt and damage of cover) Replace the corresponding part with a new part.