Side Airbag Module: Inspection
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Refer to "CAUTION" of "General Description" before handling the airbag module. < Ref. to
CAUTION , General Description. >
Check for the following, and replace the damaged parts with new parts. < Ref. to SIDE AIRBAG MODULE , INSPECTION, Inspection Locations After a Collision. >
- With side collision (when side airbag is deployed)
- Side airbag module assembly
- Backrest pad assembly
- Backrest frame assembly
- Backrest cover assembly
- When damage is found by visual check
- Headrest assembly
- Bushing
- Slide rail OUT (Driver's side)
- Slide rail IN (Driver's side)
- Seat cushion pad and frame ASSY
- Seat hinge cover
- Seat lifter lever
- Reclining lever
- Side airbag harness and connector on body side
- With side collision (when side airbag is not deployed)
Check the seat and airbag module visually, and then replace them with new parts if damaged or cracked.
Specially inspect the damage of airbag module body, mounting bracket and harness connector.
- Without side collision (dirt and damage of cover) Replace the corresponding part with a new part.