Operating Cylinder: Disassembly

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Remove the boots and push rod assembly.
NOTE: The illustration below is for a Non-turbo model.

Fig 1: Identifying Push Rod Assembly Boot
Courtesy of SUBARU OF AMERICA, INC.
Apply compressed air through clutch hose attaching port.
NOTE: Face the piston port down and place a piece of wood underneath to prevent the piston from popping out.

Fig 2: Identifying Piston Port
Courtesy of SUBARU OF AMERICA, INC.
Separate the piston and piston spring.
NOTE: The illustration below is for a Non-turbo model.

Fig 3: Identifying Piston And Piston Spring
Courtesy of SUBARU OF AMERICA, INC.