Section 97 (Instrumentation/Driver Info): General Description: Caution

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Be careful not to damage the meters and instrument panel.
Be careful not to damage the meter glass.
Make sure the electrical connector is connected securely.
After installation, make sure that each meter operates normally.
Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
Do not apply an excessive force on the printed circuit.
Do not drop or otherwise apply impact.
When the combination meter of model with immobilizer has been replaced, be sure to perform the registration of immobilizer.