Clutch Fluid: Replacement
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Use new FMVSS No. 116, DOT3 or 4 brake fluid.
- Cover the bleeder with cloth to prevent brake fluid from being splashed on surrounding parts when loosening the bleeder.
- Avoid mixing different brands of brake fluid to prevent the quality of fluid from degrading.
- Be careful not to allow dirt or dust to enter the reservoir tank.
NOTE:
- During bleeding operation, keep the clutch reservoir tank filled with brake fluid to prevent entry of air.
- Clutch pedal must be operated very slowly.
- For convenience and safety, it is advisable to have two people working.
- The amount of brake fluid required is approximately 70 m l (2.4 US fl. oz, 2.5 lmp fl. oz) for total clutch system.
- Remove the air intake chamber. (Non-turbo model) < Ref. to REMOVAL . >
- Remove the intercooler. (Turbo model) < Ref. to REMOVAL . >
- Drain the brake fluid from the reservoir tank.
- Refill the reservoir tank with recommended brake fluid.
Recommended brake fluid:
FMVSS No. 116, fresh DOT3 or 4 brake fluid
- If necessary, bleed air from the clutch fluid. < Ref. to CLUTCH FLUID AIR BLEEDING . >